FX Parts

This is a easy to install bubble level for the FX Impact Top Scope Rail. Fits in the rear hole of the top rail. Available in Green, Yellow, Blue, Red or Clear.  Installation Steps: 1. Remove 2 rear screws in top scope rail. 2. Insert bubble level...

This extended quick disconnect (QD) makes it easy for those guns with hard to reach fill nipples. A must have for FX Impacts. 1/8 BSP male threads Max 5000 psi (Do not exceed recommended pressure) Release collar close to 1.20 inches long Comes...

Factory pellet probe for the FX Crown. Available in the following calibers: - .177 - .22 - .25 . 30 *Does not include probe screw, magazine, barrel, liner, etc. 

Take your FX Dream-Pup to the next level with this 20MOA Picatinny Scope Rail. This rail will mount to the Dovetail Rail on your FX Dream-Pup to get you an additional 20MOA for sighting in or long range shooting.  High quality manufacturing by...

This is a female foster fitting that is male threaded. This can thread into most hand pumps and tank hoses on the market. This is the fitting that comes with any FX Airguns (FX Impact, Crown, etc) that have a male foster fill fitting. 

This is a threaded fill probe for the FX Wildcat/Dreamline (tube versions) & Streamline. Can thread into most air tanks/hand pump hoses. 

This is a 1-piece male foster fitting with a male quick disconnect. Used to fill up the FX Wildcat & FX Dreamline series.    

*THIS PRODUCT DOES NOT INCLUDE UTAH AIRGUNS INSTALLATION. WE WILL MAIL YOU THE KIT FOR SELF INSTALLATION.  If you would like Utah Airguns do to the install please contact us to get on our waiting list. We are currently 2-3 months out and can quote...

*DOES NOT INCLUDE BREECH OR BARREL O-RINGS. BREECH O-RING KITS ARE CALIBER SPECIFIC AND CAN BE PURCHASED HERE: https://utahairguns.com/fx-stx-barrel-breech-o-rings-pack-of-3/ This is an FX Impact, FX Impact X, FX Impact MKII (Non-Power Plenum)...

FX Factory pellet probe for the FX Impact.  Available Calibers: .177 .22 .25 .30  *Does not include probe screw, magazine, barrel, etc. Probe only. 

New designed single shot loader or Single shot tray for the FX Impact. In cooperation with some of the leading 100 meter bench rest shooters Huma has re-designed a single shot loader to achieve the best aligned single shot loader for quick and undamaged...

*WILL NOT INCLUDE .30 CALIBER SLEEVE. ONLY COMPATIBLE WITH .22 & .25 CURRENTLY.   *INCORRECT INSTALLATION AND USE WILL VOID WARRANTY.    - $65.00 INSTALLATION FEE FOR NEW GUNS. IF YOU CURRENTLY HAVE AN IMPACT YOU WOULD LIKE TO...

Pack of 4 inner breech o-rings for the FX STX Barrels. This is the inner barrel breech o-ring for the STX barrel systems. - FX Impact - FX Crown - FX Dreamline - FX Wildcat MKII & MKIII  Qty: 4 .177 Size - #C1-4.5 (FX Part #2529) .22...

IN STOCK READY TO SHIP. FIRST COME FIRST SERVE. We have some Custom FX Wildcat MK1/MK2 stocks that are already hydro-dipped and ready to go on your gun! Take your Wildcat to the next level with one of our custom hydro-dipped stocks.  *Does not...

Huma-Air tuning regulator Gen 3 for the FX impact & FX Crown as replacement for the factory regulator with a 16 mm piston and 10 mm belleville spring. Available in 2 pressure ranges: High Pressure (110-165 BAR) Extra High Pressure (135-190...

Huma-Air Power Plenum XL Set With Tuning Regulator For The FX Wildcat MKI, MKII & MKIII. *Utah Airguns Installation only available on NEW gun sales for the moment.  This Power Plenum XL Tune Set with regulator for the FX Wildcat can...

*Utah Airguns Installation only available on NEW gun sales for the moment.  AVAILABLE IN 2 MODELS: - Non-Amp Regulator (<2018) (MKI & SOME MKII) - AMP Regulator (>2019) (MKII & MKIII) *Both regulators are high pressure (100-170...

*THIS IS THE TRANSFER PORT ONLY. PROBE NOT INCLUDED. WILL WORK WITH ANY FX STX BARREL. THEY ARE CALIBER SPECIFIC. High flow, V2, dual hole transfer port with middle support bridge for FX Impact, FX Dreamline,  FX Wildcat MKIII and FX Crown...