Huma FX Impact and FX Crown Gen 3 Tuning Regulator AMP Replacement

$129.99

Huma-Air tuning regulator Gen 3 for the FX impact & FX Crown as replacement for the factory regulator with a 16 mm piston and 10 mm belleville spring. Available in 2 pressure ranges:

  • LOW Pressure (60-135) BAR)
  • Extra High Pressure (100-200 BAR) 

FX Impact or FX Crown Gen 3 Tuning Regulator by Huma-Air is specially designed as a “one on one” replacement regulator for your FX Impact , FX Impact X  or FX crown.

The benefits of the Huma-Air, FX Impact or FX Crown Gen 3 tuning regulator are:

  • Fast recovery time between shots.
  • This Huma-Air FX impact or Crown regulator can be adjusted higher in pressure from the outside while the rifle is under pressure.
  • Equal as the factory reg, if you want to lower the pressure, the rifle needs to be de-pressurized first otherwise the valve get damaged..

When you order your Huma-Air, FX Impact or FX Crown Gen 3 tuning regulator you will receive:

  • A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment
  • We will include a “Huma-Air regulated” breech sticker
  • Fitting instructions as pdf download

Please note: you need to do the stacking of the belleville springs on the piston yourself according to the manual, because we do not want to risk them to fall off the piston during shipping. 

Weight 0.02 lbs
Dimensions 5 × 5 × 5 in
Pressure Range

Extra High Pressure, Low Pressure

Related Products