.svg?ts=1752223022)
.svg?ts=1768215559)
.svg?ts=1752223097)
Huma Air FX Impact and FX Crown Gen 2 Tuning Regulator (16mm Piston) Pre-AMP Replacement
$108.89
Huma Air FX Impact and FX Crown Gen 2 Tuning Regulator (16mm Piston) Pre-AMP Replacement
Faster Recovery. External Adjustment. CNC Precision. Drop-In Replacement.
The Huma-Air FX Impact / FX Crown Gen 2 Tuning Regulator is a precision-engineered, direct replacement regulator for the FX Impact, FX Impact X, and FX Crown Gen 2 — purpose-built to solve the known issues of the factory regulator while delivering meaningful performance improvements in recovery time, adjustability, and long-term reliability. CNC produced from high-grade aircraft aluminum and bronze, individually assembled, and tested in a computerized simulation program, this is Huma-Air quality at its finest — backed by a 2-year warranty.
Overview
Huma-Air engineered this regulator specifically to fit within the fixed, limited space of the FX Impact and Crown action — a genuine design challenge that resulted in a refined, purpose-built unit that outperforms the factory regulator in several key areas. Faster recovery time between shots, external pressure adjustment capability while the rifle is under pressure, and damage-resistant valve and piston materials make this a significant upgrade over the standard FX regulator. Three pressure range options cover everything from sub-12 ft/lbs sub-sonic builds to extreme high-power configurations.
⚠️ Compatible with factory models featuring 16mm long pistons and 8mm Belleville disc springs only.
Key Features
- Direct one-for-one replacement for FX Impact, FX Impact X, and FX Crown Gen 2 factory regulator
- Significantly faster recovery time between shots compared to factory regulator
- External pressure adjustment while rifle is under pressure — no depressurization needed to raise pressure
- Damage-resistant valve and piston material — no risk of piston damage from faulty pressure adjustments
- Extra valves included — replaceable at no additional cost if accidentally damaged
- Three pressure ranges available:
- Low Pressure: 50–90 bar (sub-12 ft/lbs models)
- High Pressure: 80–150 bar (all calibers in normal FAC range)
- Extra High Pressure: 145–190 bar (extreme power settings)
- Preset to your specified pressure before shipping
- Bar pressure scale on regulator for fine-tuning and re-adjustment
- CNC produced from high-grade aircraft aluminum and bronze
- Individually assembled and tested in computerized simulation program
- Less than 1% repeat cycle difference for exceptional shot-to-shot consistency
- High-end Belleville springs designed for critical applications
- 2-year Huma-Air warranty
Performance Advantage
- Faster shot-to-shot recovery time keeps regulated pressure consistent across rapid follow-up shots
- External adjustment capability allows pressure fine-tuning without full rifle depressurization
- Damage-resistant materials eliminate the risk of costly piston damage from adjustment errors
- Included spare valves provide immediate replacement capability at zero additional cost
- Less than 1% repeat cycle difference delivers exceptional shot-to-shot velocity consistency
- Individually computerized testing on every unit guarantees performance before leaving the factory
Compatibility
- FX Impact (Pre-AMP models with 16mm piston and 8mm Belleville disc springs)
- FX Impact X (Pre-AMP models with 16mm piston and 8mm Belleville disc springs)
- FX Crown Gen 2 (Pre-AMP models with 16mm piston and 8mm Belleville disc springs)
⚠️ Compatible with 16mm long piston and 8mm Belleville disc spring models only. Verify your specific Impact or Crown configuration before purchasing.
⚠️ Belleville springs must be stacked on the piston by the user according to the included manual — not pre-stacked to prevent them from falling off during shipping.
⚠️ Raising pressure above factory set pressure is at the shooter's own risk. To lower pressure, the rifle must be fully depressurized first to prevent valve damage.
What's Included
- Huma-Air FX Impact / Crown Gen 2 Tuning Regulator (preset to your specified pressure)
- Bar pressure scale for fine-tuning and re-adjustment
- Extra replacement valves
- "Huma-Air Regulated" breech sticker
- Fitting instructions (PDF download)
Specifications
| Spec | Value |
|---|---|
| Compatible Piston | 16mm |
| Compatible Springs | 8mm Belleville disc springs |
| Pressure Range — Low | 50–90 bar |
| Pressure Range — High | 80–150 bar |
| Pressure Range — Extra High | 145–190 bar |
| Material | Aircraft Aluminum / Bronze |
| Repeat Cycle Accuracy | <1% difference |
| Warranty | 2-year Huma-Air |
Login
We’ve updated our site — please create a new password to continue.
Utah Airguns has never left me hanging . Always helped me when I call. Thanks Utah for all you do to advance the sport.
Utah airguns is hands down thee best place for airguns and supplies. I have order tons of stuff from them an a custom panthera that's currently being ...
I'm a firm believer in customer service is everything. There are many good products that are handled and sold by many vendors. Finding a vendor that t...
Utah Airguns is THE place to go for whatever airgun needs you develop. They stock top shelf gear and have the knowledge and experience to assist you ...
I have purchased plenty of high-end FX from Utah Airgun very professional business , they do bag there product up , thank u.
This is my 3rd purchase from Utah Air guns and would not consider going anywhere else
Great line of products, and top notch customer service. It’s a pleasure talking with the guys on the phone. Very knowledgeable, and willing to share a...
Very friendly people and great service and great products
Always a pleasure doing business with Utah Airguns. Very professional and treats their customers with respect.
Justin and his team are awesome. Anything you need they will have or order. They're prompt on outgoing shipments. The new place looks fantastic!